CLC plant products
Foam-Concrete-Mixer manufacturer

Foam Concrete Mixer

The mixers are uniquely designed to mix foam through concrete in an even manner without destroying the foam. It has inbuilt water discharging system and digital weighing scale.

Features :

  • High output per shift (25)
  • Precise mixture
  • Variable Foam concrete density 400-1800kg/m3
  • Specially designed shaft blades system
  • Reverse and forward mixing
  • Inbuilt digital weighing scale
  • Corrosion resistant
  • High quality bearings
  • High gauge steel body
  • Alloy shaft
  • Impact resistant couplings
  • Inbuilt water discharge system
  • Easy maintenance and operation
foam-generator manufacturer, supplier

Foam Generator

Foam generator makes foam for CLC using foaming agents. Foam generators come with corrosion resistant coated steel body, timer, air compressor, and lance units.

Features :
  • Adjustable density of foam
  • Automatic time setting to off the motor
  • Digital foam generator
  • Easy & cost effective maintenance and operation
  • Daily take 100 cubic meters with our foam generator
  • 1 HP single phase motor
  • Inbuilt control panel
  • Less power consumption
  • Corrosion resistant
  • Foam generator with lance unit
  • Adaptable to different kind of foaming agents
Air-Compressor manufacturer, supplier

Air Compressor

Foaming-Agent manufacturer, supplier

Foaming Agent

Foaming agent is normally used with 2-3% concentration in water. It has 2-years shelf-life when properly stored in the original containers at temperature between 0-50 C. Containers should not be exposed to heat or sunlight for a longer duration. It is environmentally safe and less toxic to aquatic life.
Control-Panel manufacturer, supplier

Electrical Panel

Features :

  • It having Push Button For ON/OFF motor , Conveyor
  • Weight Display STD Only Weight Display
  • Inbuilt Motor Starter
  • Over Load Protection
  • Mains Voltage Measuring Meter and Indication
Conveyor-Belt manufacturer, supplier

Conveyor Belt with Hopper

Specification Cement Fly Ash
Size 22 ft x 1.5 ft 22 ft x 2 ft
Motor 2 HP 2 HP
Hopper size 3 x 3 x 3 ft 5 x 5 x 5 ft
Mould manufacturer, supplier

Mould

Specification:

  • Mould Size: 6ft x 2ft
  • Weight: 80kg approx
  • Thickness of Mould: 3mm
Wire cutting machine manufacturer, supplier

Wire Cutting Machine

Specifications:

  • Max cutting capacity: up to 10m3/hr (only cutting time, not incl the time for transport of molds).
  • Electric power: 380-400V/ 50Hz/3 phases (other electric power resourses are available on request)
  • Very special electric geared motor for driving the cutting frame: capacity 0,35 kW
  • Geared motors to drive the cutting wires capacity of 1.1kW and 1,5 kW
  • Cutting frame guiding tubes: 4 very strong high quality alloy steel, chrome plated, with strong bushing and seals, life time guaranted
  • Control board: mounted on the side of the machine, with all control and operation buttons, emergency safety stop button,… for controlling all the cutting operation speed of of cutting wires frame. Electric alarm, lighting switch, etc.
  • All electrical & electronic components are from famous brand suppliers like Omron, LG, Schneider, to allow the operator to control the cutting process very easy at convenience
  • Cutting mode: automatic / semi-auto/ manual
  • Size of the mass concrete block before cutting: approx. 1220x1210x 400/500/600mm (height of brick depends on the buyer- options)
  • Size of the bricks: nominal standard sizes 10x20x(40/50/ 60cm), tolerance max 2mm. Other sizes available on request (for ex 7.5 /15 x 20 x 60cm)
Steam-Curing-Machine manufacturer,supplier

Steam Curing Machine

Coil Type Hot water Generator:

  • Capacity: 500 Ltr
  • Max. Temp.: 900C
  • Width: 1200mm
  • Hight: 2.5mtr
  • Jacketed Fire box: 1200mm dai
  • Wood consumption: 100 kg/ Hr.

Coil Type Hot water Generator:

  • Capacity: 1000 Ltr
  • Max. Temp.: 900C
  • Width: 1400mm
  • Hight: 3.8mtr
  • Jacketed Fire box: 1400mm dai
  • Wood consumption: 200 kg/ Hr.
Foam-Concrete-Pumps manufacturer,supplier

Foam Concrete Pumps

Advantages :

  • No Seal
  • No valve
  • Self Priming
  • Can Run Dry without Damage
  • Time Saving, Fuel Saving
  • Energy Saving, Minimum Shear
  • No Noise
  • No leakage
  • No Mechanical Seal, No Maintenance
Screw-Conveyor manufacturer, supplier

Screw Conveyor

Specification Cement Fly Ash
Size 168mm. DIA X 5 Mtrs 168mm. DIA X 5Mtrs
Capacity 25 TPH 10.6M3/HR
foam-concrete-trolley manufacturer, supplier

Trolley

Specification Material Trolley Transport Trolley
Capacity 0.5m3 1m3
Thickness 1.6mm 1.6mm
Weight 70 to 75 kg 72 to 80kg

Silos



Copyright © 2012 GUBBI. All Rights Reserved.